Kanter Yacht 65

Kanter Yacht 65 Engine: Caterpillar Mod: 3208 220 CV / 161 kW Year: 1995 Type: vela Flag: ESPAÑA Beam: 5.36 mts Loa: 20.15 mts Draft: 2.40 mts Displacement: 32205 Kg

Do you have questions?
We help you!

Carlos Fandiño Fratamico


Power:                          220 HP / 161 KW

Fuel capacity:                  3.000 Lin two stainless steel tanks

Engine Make: Caterpillar Model: 3208

Engine Hours:                   2465

12 vt engine charging alternator

24 vt service charging alternator


Electricity/ ENGINE Kanter 65


2 batteries of 250Ah for motor (2021) and 6 of 250Ah for services (2019).

6x 12vDC 250 Ah service batteries connected in parallel and in series to supply 200Ah @24vDC - 2019

2 Northern Lights generators.

12V and 24V chargers.



Cabin speakers

CD player


Hot water


Electric bilge pump

Fresh water treatment plant

Sea ​​water pump



24vDC battery charger

Air conditioning Cold / Heat

DVD Player

Manual bilge pump

Bow thruster

Power input from the dock

Bimini top

Lewmar 3000W anchor windlass, hydraulic

2 CQR anchors of 40 kg. + 2x50m. Chain. + Moorings and defenses

2 rafts of 4 people.

Auxiliary boat with outboard

Port power supply at 220 Vt and at 110 Vt

Hot water system heated by motor, by means of a 24 Vt pressure pump + 60 Lt tank

Sweet water:

Fresh water capacity of 1,000 liters in four stainless steel tanks

Cockpit speakers

DVD Player

Galley Maid 4 burner stainless steel cardan gas cooker with oven

Double cooling system: motor and powered by 220v

2 stainless steel sinks with hot and cold water supply.

LG Microwave

Washing machine in the aft toilet

Air conditioning by Marine Airsystems for cold and heat

DC fans

Halogen interior lighting with additional reading lights above bunks.

Covers, Cushions and Canvas:

Mainsail and mizzen decks

Cockpit cushions

All new covers for cockpit, boom and mizzen.

Complete canvas – 2021

Teak cockpit

Side decks in teak


Cockpit table

Bathing ladder




Length                      20.15m

Waterline length            16.25m

Beam:                        5.36m

Draft:                       2.40 m

Ballast:                    12700 Kg

Displacement:               32205 Kg

Ratio                       39.43%

Maximum passengers:         12

Cabins:                      3

Berths:                      8

Toilets:                     3

Water capacity:             1703 L

Hull and deck material Steel repainted in 2019

Aluminum Cabin

The fin keel is cast lead alloyed with antimony.

Rudder partially supported by skeg 



Hydraulic and electric winches

Navtec switchboard for against and back stay.

Schaefer System manual Genoa and Ratchet furlers,

Mizzen and hydraulic mainsail.

Carbon pole

Comfort / Interiors

Large armed cabin with bathroom included.

Large forward guest cabins with double beds and third literature.

Bathrooms included with shower in common in the bow.


Mainsail, Mizzen, Foremast and Furling Genoa,

With hydraulic controls or forwarding to electric winches.

Full set of Doyle sails in good condition

Full set of David Mass sails

Roller-furling mainsail

North Sails   furling genoa

Gennaker/Spinnaker  Cruising



Spanish flag, up-to-date certificates, taxes paid. 

Boat in good maintenance conditions

SHIPYARD: Kanter Marine, for the construction of steel cruising yachts.


In Cockpit:

Raytheon closed array scanner on the mizzen mast

2 Raymarine autopilot controls

Raymarine C120 Chartplotter

Autohelm Wind Screen

Auto rudder depth display

Auto rudder speed display

Autohelm VMG display

Icom IC-M502 VHF

Richter & Sons Steering Compass

Plotter - Grapher

Raymarine C120

Raymarine ST6000 autopilot


At the card table: 

Chartpotter Raymarine C80

Radar raytheon

Sea Hornet V Mac 3301, AIS Vessel Control

Raytheon ST80 Wind Screen

Autohelm Maxiview

Raytheon Raynav575

Communications Equipment:

Icom VHF radio at helm

Icom SSB radio at chart table

Ray90 VHF radio at chart table

JRC weatherfax

Radar              48 Mn


Keel supported main mast with mast rig and 2 sets of in-line spreaders

Stainless steel rod rig – replaced in 2011

Navtec hydraulic tensioner for main mast backstay and main and mizzen vang

Block and tackle backstay adjustment for mizzen

Harken Manual Genoa Furler

Hydraulic Main and Mizzen sails

Furling staysail

Spinnaker furling with mast track, carbon


Adjustable mainsheet track

Genoa tracks and Ratchet